Automatic Disposable Cup Machine
The automatic disposable cup machine is used to thermoform the plastic sheet (roll) into different kinds of disposable plastic products: like plastic cups, containers, trays, bowls, boxes, covers, lids, etc. The shape of the products can be round, square, rectangular or other shapes.
The automatic disposable cup machine is roughly divided into three main parts:
1) Electronic control part:
With the contactless integrated circuit, the connection of the wires is greatly reduced, the defects caused by the wires are obviously improved, and the stability is improved.
2) Institutional part:
The mechanism should be regularly maintained by lubrication to reduce the friction coefficient and reduce wear. The nuts and locking screws on the headboard should be inspected regularly to prevent the Coriner column from being damaged due to uneven force.
The mold thickness adjustment mechanism should periodically check the transmission shaft gear or chain for offset or slack. Whether the pressure plate screw on the gear is loose and the grease is sufficient.
3) Oil pressure part:
The hydraulic system should pay attention to the cleanliness of the hydraulic oil to maintain the quality of the hydraulic oil. The hydraulic oil with good stability and high quality should be used. In addition to regular replacement, the working temperature should be properly controlled below 50C to avoid deterioration. And the stability of the hydraulic action.