Cup Making Machine
The plastic thermoforming cup making machine is used to thermoform the plastic sheet (roll) into different kinds of disposable plastic products: like plastic cups, containers, trays, bowls, boxes, covers, lids, etc. The shape of the products can be round, square, rectangular or other shapes.
The plastic cup making machine Testing
1.According to electrical schematics connect heating box cables and control wires. Refer to figure 3, Add 4/5 tank volume (65 kg) of 20-30 # engine oil, Connect the Air compressor and cooling water joint, At the same time connect the equipment enclosure to protect ground line, Ensure the safety of operating personnel.
2.Check all switch to the "off" status, turned on the total power, close the air switch (QF1, QF2, QF3, QF4), Referring to electrical schematics, deliver electric to the device.
3.Starting hydraulic (pump) button counterclockwise to unscrew the pressure regulating valve. Its pressure gauge should indicate (normal operating pressure regulator in 8-12Mpa), Otherwise, change the direction of motor rotation and rewiring. Feeding speed control on the minimum range, after press the feed button, then increase speed, the cam should turn its back, otherwise rewiring. Slow down and stop.