Plastic PP Extrusion Line
The plastic PP extrusion line is used to produce plastic sheet or rolls. The material can be PP,PS and PE. The sheet can be used in thermoforming machine to produce disposable plastic cups, lids, trays, boxes, etc..
A: According to the sketch map, arrange the machine sequentially and keep flat on the cement ground, do not need to strengthen in addition.
B: Regard horizontal center line of extruder roller ( should be that the screw stem) as machine install the central axis line. Machine other equipment all as this central axis benchmark, go along install.
C: When install the extruder roller axes line, calender roller axes line, rewinder axes line, machine head mouth transverse line, rewinder roller axes line all according adjust the below screw reach the level state, with installing the central axes vertically and rightly in the plastic PP extrusion line.
D: When install the calender roller and machine head die mouth, try best to near, better between 50mm-100mm, can promote wheel, move plastic PP extrusion line forward or to after.
E: Leave the rewinder and calender a bit farther, about between 2-4 meter.